Marine hardware lives in saltwater, sun and spray, so the washer has to resist corrosion, UV and weather without breaking down. We stock marine-suitable rubber washers in every OD, ID and thickness.
Best materials for marine use
For boat hardware, through-hull fittings and saltwater-exposed fasteners we recommend Neoprene and EPDM. Neoprene resists saltwater and weather and is a proven marine all-rounder, while EPDM adds excellent UV and ozone resistance for above-deck, sun-exposed fittings.
Common sizes
- 3/8" to 2" OD depending on fitting size
Key properties to look for
- Saltwater resistance
- UV resistance
- Weather resistance
Shop all rubber washers · Compare materials · Get a bulk quote
Shop Marine rubber washers by size
Every washer is listed by its exact outside diameter (OD), inside diameter (ID) and thickness. See the marine washer sizes, or go straight to the sizes in stock now.
By material: Neoprene · EPDM · Viton.
How to pick the right size
- ID: match it to the bolt, screw or stem the washer slides over (a 1/4" bolt takes a 1/4" ID).
- OD: wide enough to cover the hole or seat you are sealing, without overhanging the part.
- Thickness: replace like for like; measure the old washer with calipers if you have one.
How to measure a rubber washer · Rubber washer size chart · Compare materials