Jump to an exact size
1,746 sizes in 7 materials. Pick OD, ID and thickness to jump straight to the product.
Rubberwasherwarehouse
Rubber Washer 3/4" OD x 3/8" ID x 1/16" Thick
Regular priceFrom $0.26Unit priceIn stockRubberwasherwarehouse
Rubber Washer 1" OD x 1/2" ID x 1/8" Thick
Regular priceFrom $0.31Unit priceIn stockRubberwasherwarehouse
Rubber Washer 1/2" OD x 3/16" ID x 1/16" Thick
Regular priceFrom $0.19Unit priceIn stockRubberwasherwarehouse
Rubber Washer 1-1/4" OD x 1/2" ID x 1/8" Thick
Regular priceFrom $0.35Unit priceIn stockRubberwasherwarehouse
Rubber Washer 1/2" OD x 1/4" ID x 1/16" Thick
Regular priceFrom $0.19Unit priceIn stockRubberwasherwarehouse
Rubber Washer 1" OD x 3/8" ID x 1/8" Thick
Regular priceFrom $0.31Unit priceIn stockRubberwasherwarehouse
Rubber Washer 1-1/8" OD x 3/8" ID x 1/8" Thick
Regular priceFrom $0.33Unit priceIn stockRubberwasherwarehouse
Rubber Washer 7/8" OD x 3/8" ID x 1/16" Thick
Regular priceFrom $0.26Unit priceIn stockRubberwasherwarehouse
Rubber Washer 3/4" OD x 5/16" ID x 1/8" Thick
Regular priceFrom $0.36Unit priceIn stockRubberwasherwarehouse
Rubber Washer 7/16" OD x 3/16" ID x 1/16" Thick
Regular price $4.99Unit priceRubberwasherwarehouse
Rubber Washer 9/16" OD x 3/16" ID x 1/16" Thick
Regular price $4.99Unit price
About Automotive Rubber Washers
Rubber washers for drain plugs, fender sealing, body panels, fluid fittings and under-hood fastening. Nitrile is the pick around fuel, oil and grease; Viton handles hot aggressive fluids; Neoprene covers general body and trim work. Every size below ships in all seven materials at 60 durometer.
Match your application in the automotive washer guide, convert metric bolt sizes with the mm tables (or jump straight to M6, M8 and M10), or search all 1,700+ sizes in the Washer Size Finder.
Fender liner or splash shield held on with plastic clips? Our sister store Push Rivet Warehouse sells 8mm push rivets and fender liner clips.
Also need rubber feet or grommets?
Firewall and body-panel holes take rubber grommets, and battery boxes, tool chests and trailers use rubber feet and bumpers. Our sister store Rubber Feet Warehouse ships them from the same Elgin, SC warehouse.
Rubber grommets · Grommet size chart · Rubber feet · Vibration isolator mounts
Automotive rubber washer sizes in stock
These automotive washer sizes ship from stock today; every other size in this collection is cut to order in the same seven materials.
| OD | ID | Thickness | Size |
|---|---|---|---|
| 3/4" | 3/8" | 1/16" | 3/4" x 3/8" x 1/16" rubber washer |
| 1" | 1/2" | 1/8" | 1" x 1/2" x 1/8" rubber washer |
| 1-1/4" | 1/2" | 1/8" | 1-1/4" x 1/2" x 1/8" rubber washer |
| 1/2" | 1/4" | 1/16" | 1/2" x 1/4" x 1/16" rubber washer |
| 1/2" | 3/16" | 1/16" | 1/2" x 3/16" x 1/16" rubber washer |
| 1-1/8" | 3/8" | 1/8" | 1-1/8" x 3/8" x 1/8" rubber washer |
| 1" | 3/8" | 1/8" | 1" x 3/8" x 1/8" rubber washer |
| 7/8" | 3/8" | 1/16" | 7/8" x 3/8" x 1/16" rubber washer |
| 7/8" | 1/2" | 1/16" | 7/8" x 1/2" x 1/16" rubber washer |
| 3/4" | 5/16" | 1/8" | 3/4" x 5/16" x 1/8" rubber washer |
| 3/4" | 5/16" | 1/16" | 3/4" x 5/16" x 1/16" rubber washer |
| 5/8" | 1/4" | 1/16" | 5/8" x 1/4" x 1/16" rubber washer |
How to choose an automotive rubber washer
- Bolt first: pick an ID equal to the bolt or stud: 1/4" ID for 1/4" and M6 bolts, 5/16" for 5/16" and M8, 3/8" for 3/8" and M10 (see the M6, M8 and M10 pages above).
- Then the face: for sealing over a drilled hole, choose an OD at least three times the hole diameter so the rubber bridges and compresses around it.
- Then the thickness: 1/16" suits flat mating faces; 1/8" takes up surface irregularities and vibration.
- Then the material: nitrile (NBR) near oil, fuel and grease; Viton (FKM) for hot fluids; neoprene for body panels and trim.
Automotive washer FAQ
Which rubber washers are fuel resistant?
Nitrile (Buna-N, NBR) and Viton (FKM). EPDM has poor oil resistance and should not be used around fuel or motor oil.
Can I use a rubber washer on an oil drain plug?
Many drain plugs are specified with a crush or fiber washer; for those, see our fiber washers. Where a rubber seal is specified, nitrile is the usual choice.
How do I measure the old washer?
Measure the outside diameter (OD), the hole (ID) and the thickness with a ruler or calipers, then match all three. Our how-to-measure guide and rubber washer size chart show inch and mm equivalents, and the Size Finder searches all 1,700+ sizes.