Jump to an exact size
1,746 sizes in 7 materials. Pick OD, ID and thickness to jump straight to the product.
Rubberwasherwarehouse
Rubber Washer 2" OD x 3/4" ID x 1/8" Thick
Regular priceFrom $0.51Unit priceIn stockRubberwasherwarehouse
Rubber Washer 2" OD x 1/2" ID x 1/8" Thick
Regular priceFrom $0.51Unit priceIn stockRubberwasherwarehouse
Rubber Washer 2" OD x 1" ID x 1/8" Thick
Regular priceFrom $2.99Unit priceVery low stockRubberwasherwarehouse
Rubber Washer 2" OD x 1" ID x 3/32" Thick
Regular priceFrom $2.49Unit priceIn stockRubberwasherwarehouse
Rubber Washer 2" OD x 1/4" ID x 1/8" Thick
Regular priceFrom $0.67Unit priceIn stock
About 2" OD Rubber Washers
2" rubber washers measure 2" (50.8 mm) across the outside edge. We list 98 of them, in every inside diameter and thickness shown below, so you can match the bolt or pipe the washer slips over and the gap it has to seal. The outside diameter sets how much surface the washer covers: it should sit flat on the mating face without hanging over the edge.
2" OD sizes we keep in stock
- 2" OD x 1/4" ID x 1/8" thick: Neoprene, $0.67 each
- 2" OD x 1/2" ID x 1/8" thick: Neoprene, $0.51 each
- 2" OD x 3/4" ID x 1/8" thick: Neoprene, $0.51 each
- 2" OD x 1" ID x 3/32" thick: EPDM, $2.49 each
- 2" OD x 1" ID x 1/8" thick: Neoprene, $2.99 each
Stock changes daily; the product page always shows what ships today. Quantity pricing applies automatically at checkout.
Every 2" OD size we list
| Inside diameter (ID) | Thicknesses listed |
|---|---|
| 1/8" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 3/16" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 1/4" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 5/16" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 3/8" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 7/16" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 1/2" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 9/16" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 5/8" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 3/4" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 7/8" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 1" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 1-1/4" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
| 1-1/2" | 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2" |
How to pick the right 2" washer
Measure the old washer edge to edge for the outside diameter, straight across the hole for the inside diameter, and on edge for thickness (our measuring guide shows each step). For the hole, pick the size that is a snug fit on your bolt or pipe, no more than about 1/32" loose. For thickness, 1/16" to 1/8" suits flat seals under a bolt head or in a fitting, and 1/4" and up absorbs vibration and fills gaps; the thickness guide has the full chart.
FAQ
What does 2" OD mean on a rubber washer?
OD is the outside diameter: the washer measures 2" (50.8 mm) across. The size that fits your bolt or pipe is the ID, listed separately.
Which 2" OD washers ship today?
The stocked sizes are listed above, for example the 2" OD x 1/4" ID x 1/8" thick in Neoprene at $0.67. Each product page shows live stock.
What if my size or material is sold out?
Use the custom size calculator for an instant price on any OD, ID and thickness in neoprene, EPDM, silicone or Viton. Custom sizes are made to order in the USA and ship in about 4 weeks.
Which material should I choose?
Neoprene is the all-round choice for water, weather and general sealing; EPDM for outdoor and hot-water use; nitrile for oil and fuel; silicone for high heat and food contact; Viton for fuel and chemicals. The material comparison has the full chart.
Related: rubber washer size chart, neoprene rubber washers.