Jump to an exact size
1,746 sizes in 7 materials. Pick OD, ID and thickness to jump straight to the product.
Rubberwasherwarehouse
Rubber Washer 3/4" OD x 1/2" ID x 1/2" Thick
Regular priceFrom $0.52Unit priceIn stock
About Shower Head Washers — Flat Rubber Washers for Shower Arms
Shower head washers stop leaks where the shower head meets the arm. A standard US shower arm uses 1/2" NPT threading, sealed by a flat rubber washer approximately 3/4" OD with a 1/2" center hole — the sizes in this collection. If your shower head drips from the connection (not the spray face), the washer inside the swivel nut has flattened or cracked. Unscrew the head, swap the washer, hand-tighten back on — no tools required for most heads. Choose silicone or EPDM for the best hot-water life. Measure your old washer to confirm the size, and note that orders over $9.95 ship free.
Shower head washer sizes in stock
These shower head washer sizes ship from stock today; the other 13/16" and 7/8" OD sizes are cut to order.
| OD | ID | Thickness | Size |
|---|---|---|---|
| 3/4" | 1/2" | 1/16" | 3/4" x 1/2" x 1/16" rubber washer |
| 3/4" | 1/2" | 1/4" | 3/4" x 1/2" x 1/4" rubber washer |
| 7/8" | 1/2" | 1/16" | 7/8" x 1/2" x 1/16" rubber washer |
| 3/4" | 1/2" | 1/2" | 3/4" x 1/2" x 1/2" rubber washer |
Shower head washer FAQ
What size washer fits a shower head?
Nearly all US shower arms are 1/2" NPT, so the washer is about 3/4" OD x 1/2" ID. If the nut is larger, try 13/16" or 7/8" OD with the same 1/2" hole. Full details: shower head washer size guide.
Which thickness should I buy?
Match the old washer: thin 1/16" washers suit most swivel nuts, and thicker ones take up a worn or deep nut.
How do I measure the old washer?
Measure the outside diameter (OD), the hole (ID) and the thickness with a ruler or calipers, then match all three. Our how-to-measure guide and rubber washer size chart show inch and mm equivalents, and the Size Finder searches all 1,700+ sizes.